Roof Exhaust

Shan-Shin Metal Co., Ltd is one of the renowned names involved in Taiwan manufacturer, supplier and exporter a comprehensive range of Roof Exhaust. We provide these products with different gradations in size and specifications customizable as per the clients\' exact needs. We sincerely welcome your inquiry for any kinds of custom made products. Our clients can avail from us these high quality products at affordable prices.
We have accumulated rich experience and valuable technical supports in producing

Roof Exhaust

. Whenever and wherever, we never give up our goal that is to supply high quality, Competitive price and best service to our customers.
  • Roof Exhaust - SUC04
Roof Exhaust
Model - SUC04
Industrial Ventilator_20 inch of stainless steel 430 (bottom of five grooves)
SUC04

In summer, attic temperatures can soar to over 150 degrees. This heat conducts through the ceiling into living spaces and causes the air conditioner to run longer to meet thermostat settings, increasing energy costs. Acute attic heat can also damage wooden structural components and cause thermal loss from HVAC ducts routed through the attic.

Characteristic

The rotation principle of wind driven turbo ventilators
※The sphere could work through hot air rise inside and hot air discharge from the chink of twenty-four blades.

※The power come from the air discharge from inside to outside and the temperature range and   pressure difference between inside and outside.

※Breeze could bring air pressure to drive the sphere. Therefore, ventilators run without consuming electricity.

● Firm and durable: the quality is more outstanding of the sphere from many patented technology.

● Corrosion proof: stainless steel 430.

● Bearing: the bearings are imported with original packing from Germany.      Besides, the bearings add to dust covers so that the sphere runs smoothly. And breezes just drive the sphere.

● Rainproof: when the sphere runs, it removes rain. Because of centrifugal force from the sphere running. And the rainproof arcs of outside blades increase more effect.

● No noise: Natural wind could drive the wind driven turbo ventilators. Do not worry about noise from using motor.

● Dust-proof: do not have to wash the wind driven turbo ventilators. The sphere runs 24 hours, so dust does not adhere to the wind driven turbo ventilators easily.

● Natural light: light could shine inside from the crack between blades and blades. It would increase about 20% illumination to save the cost of electricity. Wind driven turbo ventilators are most choices to green buildings.
 

Shan-Shin Metal Co., Ltd
SUC04
none
999999999 http://schema.org/InStock USD 2020-12-31
90out of 100based on 100user ratings
Enquiry Now
Products List
Shan-Shin Metal Co., Ltd
To find and shop the best Roof Exhaust, you need to know about the highest quality of Roof Exhaust manufacturer, supplier, wholesaler, distributor, OEM and ODM from a factory in Taiwan
SUC11
none
999999999 http://schema.org/InStock USD 2020-12-31
90out of 100based on 100user ratings
Turbine Vents_16-inch upper part SUC11 Characteristic ●  Firm and durable: the quality is more outstanding of the sphere from many patented technology. ● Corrosion proof: stainless steel. ● Bearing: the bearings are imported with original packing from Germany.  Besides, the bearings add to dust covers so that the sphere runs smoothly. And breezes just drive the sphere. ● Rainproof: when the sphere runs, it removes rain. Because of centrifugal force from the sphere running. And the rainproof arcs of outside blades increase more effect. ● No noise: Natural wind could drive the wind driven turbo ventilators. Do not worry about noise from using motor. ● Dust-proof: do not have to wash the wind driven turbo ventilators. The sphere runs 24 hours, so dust does not adhere to the wind driven turbo ventilators easily. ● Natural light: light could shine inside from the crack between blades and blades. It would increase about 20% illumination to save the cost of electricity. Wind driven turbo ventilators are most choices to green buildings. In a typical passive attic ventilation design, fresh air enters the attic through soffit vents below the eaves and rises to exit the attic at vents near the peak of the roof. In many cases, this design does not exhaust hot air at a rate sufficient to keep attic temperatures below 100 degrees. Installation of a turbine roof ventilator near the roof peak augments natural passive ventilation, increasing circulation and exhausting a greater volume of hot air from the attic.
Shan-Shin Metal Co., Ltd
To find and shop the best Roof Exhaust, you need to know about the highest quality of Roof Exhaust manufacturer, supplier, wholesaler, distributor, OEM and ODM from a factory in Taiwan
SUC02
none
999999999 http://schema.org/InStock USD 2020-12-31
90out of 100based on 100user ratings
Wind Driven Ventilator_24 inch of stainless steel 430 (bottom of five grooves)* SUC02 Characteristic The rotation principle of wind driven turbo ventilators ※The sphere could work through hot air rise inside and hot air discharge from the chink of twenty-four blades. ※The power come from the air discharge from inside to outside and the temperature range and   pressure difference between inside and outside. ※Breeze could bring air pressure to drive the sphere. Therefore, ventilators run without consuming electricity. ● Firm and durable: the quality is more outstanding of the sphere from many patented technology. ● Corrosion proof: stainless steel 430. ● Bearing: the bearings are imported with original packing from Germany.      Besides, the bearings add to dust covers so that the sphere runs smoothly. And breezes just drive the sphere. ● Rainproof: when the sphere runs, it removes rain. Because of centrifugal force from the sphere running. And the rainproof arcs of outside blades increase more effect. How to Install? 1. Climb into the attic and select a location to install the turbine roof ventilator. A spot approximately 16 inches below the peak of the roof centered between two rafters is ideal. Drive a nail through the center point of the location to mark it. 2. Make sure the roof is dry and set up a ladder in a secure location. Climb up on the roof and find the spot where the marker nail emerges. 3. Center the template provided by the manufacturer over the installation location and cut a circular hole through the shingles and roof sheathing with a reciprocating saw to match the size of the template.
Shan-Shin Metal Co., Ltd
To find and shop the best Roof Exhaust, you need to know about the highest quality of Roof Exhaust manufacturer, supplier, wholesaler, distributor, OEM and ODM from a factory in Taiwan
SUC07
none
999999999 http://schema.org/InStock USD 2020-12-31
90out of 100based on 100user ratings
Wind Driven Ventilator_24-inch upper part of stainless steel 304* SUC07 The rotation principle of wind driven turbo ventilators ※The sphere could work through hot air rise inside and hot air discharge from the chink of twenty-four blades. ※The power come from the air discharge from inside to outside and the temperature range and   pressure difference between inside and outside. ※Breeze could bring air pressure to drive the sphere. Therefore, ventilators run without consuming electricity. 1. Stainless steel 304. 2. The bearings are imported with original packing from Germany.  Besides, the bearings add to dust covers so that the sphere runs smoothly. And breezes just drive the sphere. 3. Natural wind could drive the wind driven turbo ventilators. Do not worry about noise from using motor. 4. Do not have to wash the wind driven turbo ventilators. The sphere runs 24 hours, so dust does not adhere to the wind driven turbo ventilators easily. 5.Light could shine inside from the crack between blades and blades. It would increase about 20% illumination to save the cost of electricity. Wind driven turbo ventilators are most choices to green buildings.